Free Cut Mining Hose

Free Cut Mining Hose is a straight hard wall hose with an integrally constructed end connection. The other end of the hose can be plain or with a two-piece sleeve fitting.

This type of hose is used when the distance from pipe to pipe cannot be accurately measured. Mining hose can be cut to length on site and retrofitted into the pipeline with sleeve couplings. The pressure rating of the hose is based on the pressure rating of the sleeve fitting.


  • Technical Parameter
  • Dimensional data sheet
  • Downloads

Brand: FENGCHI

Model: SH-F series

Nominal diameter: DN50~DN300

Hose length: up to 15m

Pressure level: 0~5Mpa can be customized higher according to requirements

Temperature: -20℃~90℃

Connection method: flange, thread

Flange type: GB, ANSI, GOST, JIS, etc.

Additional options: branches, wear detection system (plug-in or push-button)

Lining: Wear-resistant, corrosion-resistant, high-temperature resistant rubber optional

Reinforcement layer material: reinforced fiber cloth

Shell material: UV-resistant, ozone-resistant rubber

Connection material: carbon steel, stainless steel, etc.



Size

Standard

thickness

Max 

thickness

Standard

pressure

Max

pressure

DN
mmmmkpakpa
50
6
610005000
806910005000
10061210005000
12561210005000
15061210005000
20061210005000
25091510005000
30091910005000

※ Products are fully customizable, with non-standard specifications available upon request.

※ Standard hose thicknesses are recommended for general slurry applications.